Skip to main content
38 cm × 12 cm × 12 cm ‐ 3 kg
38 cm × 12 cm × 12 cm ‐ 3 kg
Heat exchanger accessory used to connect the hot tub or swim spa to an external water heating system, a.e. for energy saving with solar.
| Article Code | BL-ASCAMB |
| Dimensions | 38 × 12 × 12 cm |
| Weight | 3 kg |
| Warranty | 2 years |
| CE Compliance | Yes |
| Separate Shipping | No |
| Type | Spare Parts |
Beauty Luxury products are hand-made by craftsmen. For this reason, the stated measures may undergo slight variations. The product and accessory photos shown may therefore differ slightly from the final product. The photos shown are not binding. Excluding consumable products, all others are delivered by a specialised courier. For this reason, the exact shipping cost will only be indicated after the exact delivery address has been provided (please always report the presence of restricted-traffic zones, historic centres, or narrow streets inaccessible to trucks).
BL-ASCAMB is a passive heat exchanger that can be installed on all spas. The exchanger connect to 2 water-circuits, one that carries the heat that can come from a solar thermal system or a gas heating system, while the second circuit becomes part of the hot tub water circulation. The installation must be carried out by specialised personnel. Built in titanium and galvanized AISI 316 stainless steel, the exchanger has a very low weight and the large exchange surface gives it a nominal power of 42 kW or 36,120 kcal/h. Perfect with Beauty Luxury products, the exchanger can also be installed on products of other brands.
BL-ASCAMB is a passive heat exchanger that can be installed on all spas. The exchanger connect to 2 water-circuits, one that carries the heat that can come from a solar thermal system or a gas heating system, while the second circuit becomes part of the hot tub water circulation. The installation must be carried out by specialised personnel. Built in titanium and galvanized AISI 316 stainless steel, the exchanger has a very low weight and the large exchange surface gives it a nominal power of 42 kW or 36,120 kcal/h. Perfect with Beauty Luxury products, the exchanger can also be installed on products of other brands.
BL-ASCAMB is a passive heat exchanger that can be installed on all spas. The exchanger connect to 2 water-circuits, one that carries the heat that can come from a solar thermal system or a gas heating system, while the second circuit becomes part of the hot tub water circulation. The installation must be carried out by specialised personnel. Built in titanium and galvanized AISI 316 stainless steel, the exchanger has a very low weight and the large exchange surface gives it a nominal power of 42 kW or 36,120 kcal/h. Perfect with Beauty Luxury products, the exchanger can also be installed on products of other brands.